• Long Distance (100m) Bluetooth Broad-app Module with high power amplifier: Class 1 (18dBm) and high receiver sensitivity (-88dBm)
• Pin-to-pin compatible with SBT-810-BBM-C2 (Class 2)
• BT specification version 2.0 compliant
• Support point(1)-to-multipoint(7) communication
• On-board Extra 16-bit RISC mixed signal microprocessor to control BT for various applications without need of external host controller
• RoHS compliant
• 128k I2C CMOS serial EEPROM (Optional)
• Size: 34 x 16.5 x 3 mm
• Power Supply: 3.3V
• Temperature Range: -20 ⁰C to +70 ⁰C

• 4dBm output power, and -88dBm receiver sensitivity to offer over 10~20m radio coverage
• Pin-to-pin compatible with SBT-810-BBM-C1 (Class 1)
• Bluetooth specification version 2.0 compliant
• Support point(1)-to-multipoint(7) communication
• Extra 16-bit RISC mixed signal micro-controller to control BT for various applications on board without need of any host controller
• RoHS compliant
• 128k I2C CMOS serial EEPROM (Optional)
• Size: 34 x 16.5 x 3 mm
• Power Supply: 3.3V
• Temperature Range: -20 ⁰C to +70 ⁰C

SBT-810-BBM(UART), Class 1 or Class 2  Bluetooth Broad-app Module 

• Plug-and-play Bluetooth broad-app module, SBT-810-BBM(UART) (Class 1 or Class 2) via RS-232 ports
• No knowledge needed about Bluetooth protocol stacks, including HCI commands True Serial Port Cable Replacement
• No Bluetooth software stacks or driver required
• Bluetooth specification version 2.0 compliant
• On-board extra 16-bit RISC mixed signal micro-controller to control BT serial port communication for various applications without need of any host controller
• RoHS compliant
• 128k I2C CMOS serial EEPROM (Optional)
• Class 1: Long Distance (100m) with high power amplifier: 18dBm and high receiver sensitivity (-88dBm); Class 2: 50W RF port with 4dBm output power and -88dBm receiver sensitivity to offer over 10~20m radio coverage with nominal 0dBi omni-directional antenna
• Surface mount module size: 34 x 16.5 x 3 mm
• Power Supply: 3.3V
• Temperature Range: -20 ⁰C to +70 ⁰C

• One point to 7 points wireless communication between Bluetooth USB dongle and Bluetooth Barcode Scanner, SBT-810-BBS (Class 1 or Class 2). Each package of barcode data (max 80bits), could be transmitted within 100 to 400ms to Bluetooth Barcode Server Center (BBSC)
• In Bluetooth Broad-App Module (SBT-810-BBM), a 16-bit RISC mixed signal micro-controller to bridge the barcode engine and Bluetooth chip, and an embedded software in it to provide all signals needed for Barcode Engine and barcode data transmission
• Built-in long range & high speed CCD scanning engine.
• The Scanner can automatically link to the BBSC via the USB dongle quickly by simply pushing a button. The operation is very easy and straightforward, because a 16-bit RISC mixed signal micro-controller conducts all signaling, control, data flow, and etc. between the barcode engine and Bluetooth chip.
• Two AA batteries are used and maximum operation time is achieved by putting the scanner into power saving mode after 100s. 20,000 scans with normal AA type battery capacity.
• Bluetooth USB dongle connected to a computer or laptop serves as the Bluetooth Barcode Server Center (BBSC) to receive a barcode data automatically from 7 scanners.
• The scanner with nominal 0dBi omni-directional antenna (50W), Class 1: 18dBm output power (Class 1), and -88dBm receiver sensitivity to offer over 100m-radio coverage; Class 2: 4dBm output power, and -88dBm receiver sensitivity to offer over  10~20m radio coverage
• Compliance with Bluetooth specification version 2.0
• Package size: 200 x 140 x 60 mm
• Package weight: 300 g

• Bluetooth 2.0 standard compliant
• Point to multi-points with up to 256 Badges being discoverable with one USB dongle
• Class 2 radio configuration with 4dBm TX output
• Sensitivity -88dBm RX Sensitivity
• Works in conjunction with a Class 2 USB dongle to achieve over 10 ~ 20 meters of RF coverage range

The EVB is a test platform for BBM Bluetooth Modules. The test platform allows for all the features of the installed module to be utilized in a development environment. This includes providing an RS232 line driver and serial connector for HCI UART applications, an audio CODEC and audio connection jacks for PCM Audio (SCO) applications, and connectors for USB, external power, and as external antenna. 

• SBT-900-SPP (Class 1 or Class 2) Bluetooth Serial Port Profile (SPP) Module
• High TX output power (max. 20dBm) for Class 1 module
• Good receiver sensitivity (-81dBm) for both Class 1 and 2 modules
• Support one(1) master to three(3) active slaves communication
• Complete lower and upper layers of the Bluetooth stack, including: (1) Generic Access Profile (GAP); (2) Service Discovery Application Profile (SDAP); (3) Serial Port Profile (SPP)
• Size: 34 x 16.5 x 3 mm
• Power Supply: 3.3V
• Temperature Range: -40 ⁰C to +85 ⁰C
• Bluetooth specification version 1.1 compliant